Beijing GFUVE Electronics Co.,Ltd.
GFUVE Electronics are an exclusive split core current transformer & current sensors manufacturer.
Add to Cart
FU-16 series of split-core current transformer offers 333mV, 100mV-2V and 10mA-200mA at secondary from sensed primary current. Without using secondary CT inside of meter, users directly connect FU-16 series to meter for high accuracy metering application.
It enables one meter to be adopted for various current rating by only changing primary CT so it makes compact meter design and reduces developing cost. Also, over-voltage protection circuit is included to offer safe, fast and cost effective installation.
APPLICATIONS
1. Power meter and harmonic meters
2. Energy meter (kWh meter)
3. Recorders, loggers, oscilloscopes
4. Power quality monitoring
5. Switchgear
6. Distributed measurement systems
7. General Sets
8. Control panels
| Technical parameters | |
|---|---|
| Standards | IEC/EN60044-1 & IEC61010-1 & IEC61869-2&ANSI C57.13 |
| Ratio | 1000: 1 or 2000:1 , customized |
| Nominal input current(Primary current) | 20A/30A/40A/50A/60A/80A/100A/150A/200A |
| Overload withstand | 1.2 times rated current continuously |
| Accuracy | 0.2%, 0.5 %, 1% |
| System Voltage | 720V(0.72kV) |
| Output signal | 10mA-200mA AC optional 333mV AC or 100mV-2V optional |
| Frequency range | 40 Hz-500 Hz |
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute |
| Output | Standard 2.5 meter cable |
| Protection Level | 3.0V0-P |
| Installation Category | CATⅡ or CATⅢ 600VAC |
| Max. jaw opening | 16 mm |
| Mechanical parameters | |
| Dimensions (W×D×H) (mm) | 38mm×55mm×18mm |
| Weight(g) | 60 |
| Operating conditions | |
| Operating temperature | -25°C to +55°C |
| Relative Humidity | 0-85% non-condensing |
| Altitude | <3500 meters |
| Condition | No existence of severely begrimed, erosive and radioactive gas in the air. Permission of long-term operation under rated current. |